Came FAST PLUS kit

FAST PLUS is a complete kit for automatic control of a double-leaf gate mounted on brick or masonry posts. The maximum length of a single leaf is 2.30 m. The operators have articulated arms and endstops – we recommend installing a stopper at the entrance.

Advantages:
- Fast is a new operator with articulated arm, designed for gates with a leaf length of 2.30 m, mounted on masonry posts with a width of at least 20 cm,
- built-in control board in one of the operators makes installation and cabling work easier,
- in case of power outage, the operators are equipped with a convenient release mechanism,
- dedicated to grey- and graphite-coloured modern-looking gates.

 The FAST PLUS kit includes the following components:
- 230-V electromechanical operator with articulated arm and built-in ZF1 control board,
- 230-V electromechanical operator with articulated arm,
- frequency card,
- DIR10 photocells,
- available remote control types: Top (2-channel) or Space (2-channel).

Specification:
- maximum gate weight with 2.30-m leaf length: 200 kg,
- operators should be installed on brick and masonry posts with a size of 380x380 (min. size: 200x200 mm),
- maximum motor power: 160 W,
- 90° opening time: 18 s,
- duty cycle: 30%, residential,
- thrust: 180 Nm,
- operating temperature: -20°C to +55°C.

Standard functions:
- endstops integrated into the operators enable quick and accurate adjustment of leaf opening and closing points,
- automatic closing,
- gate stopping with the remote control,
- safety even when the gate is not moving thanks to the special electronic circuit which ignores every command if an obstacle is detected by the safety devices.

Additional functions:
- partial opening of the gate to allow pedestrian passage if the control board is replaced with the ZA3 board,
- an additional photocell kit should be installed after replacing the control board with the ZA3 board.