Advantages:
- Ver operators are supplied with 24-V voltage for complete safety,
- the motor automatically detects obstacles when the door is closing,
- slowdown during closing,
The VER 13 kit includes the following components:
- 24 V operator with encoder,
- drive rail not included,
- the operator must be purchased complete with the drive rail in order for the kit to be ready for installation.
Instructions in the link.
Specification:
- door area of up to 18 m2,
- maximum motor power: 260 W,
- opening time of up to 6 m/min,
- duty cycle: 50%, residential,
- thrust: 1300 N,
- operating temperature: -20°C to +55°C.
Standard functions:
- amperometric obstacle detection adjustable with a trimpot,
- a lamp can be connected to illuminate the garage,
- endstops integrated into the operators enable quick and accurate adjustment of opening and closing points,
- door stopping with the remote control,
- safety even when the door is not moving thanks to the special electronic circuit which ignores every command if an obstacle is detected by the safety devices.
Additional functions:
- emergency power supply after the VO670 card is connected.
- The product should be used exclusively in accordance with its intended purpose.
- The product should not be subjected to mechanical loads other than those resulting from its normal use.
- The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
- The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
- Do not expose the product to open flames or high temperatures.
- Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
- Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
- Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
- The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
- Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
- If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
- Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
- If there are any doubts about proper use, please consult the manufacturer.
Tulplast Socha sp. k.
62-021 Paczkowo
ul. Wiosenna 27
Monday to Friday 8:00 to 16:00
+48 61 815 70 16 / +48 696 172 856
zamowienia@tulplast.pl
We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl
+48 61 815 70 16
order@tulplast.pl
