A carriage designed for self-supporting sliding gates. Used for various gate profiles and semi-closed C-sections. The gate carriages are galvanized and reinforced with yellow CR VI zinc, making them more durable and corrosion-resistant. The galvanic layer is approximately 8-12 um thick.
The sliding carriages have metal rollers and one polyamide roller.
We also recommend carriages made entirely of polyamide rollers!
Advantages of the polyamide roller with bearings:
- They are manufactured using the injection method, which guarantees high resistance to abrasion and cracking.
- They reduce the noise level when moving the gate.
- Abrasion is lower than with steel rollers.
- The metal profile of the gate is not subject to abrasion.
- High resistance to changing weather conditions.
Carriage installation:
We install the carriages at the end of the gate in the so-called counterweight. It is assumed that the counterweight length is 1/3 of the clear gate length or in gates longer than 8 m approx. ½ of the clear gate length. The carriage's assembling plate has four elongated holes - so-called beans, where it is attached to the ground using an anchor or threaded rods. The maximum diameter of the bars is M16, and the recommended diameter is M14.
Steady 3-roller carriage:
Steady 3-roller carriages are used for short and light gate designs. The main advantage is the lack of wedging of the carriage in the running profile.
Gate load capacity: 180 kg.
Gate length in clear: 3–4 m.
Assembling plate: TYPE „A” - standard.
- The product should be used exclusively in accordance with its intended purpose.
- The product should not be subjected to mechanical loads other than those resulting from its normal use.
- The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
- The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
- Do not expose the product to open flames or high temperatures.
- Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
- Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
- Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
- The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
- Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
- If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
- Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
- If there are any doubts about proper use, please consult the manufacturer.
Tulplast Socha sp. k.
62-021 Paczkowo
ul. Wiosenna 27
Monday to Friday 8:00 to 16:00
+48 61 815 70 16 / +48 696 172 856
zamowienia@tulplast.pl
We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl
+48 61 815 70 16
order@tulplast.pl
