Column-type signaling and lighting lamp, designed for mounting on posts with dimensions from 100 × 100mm to 120 × 120 mm, combines lighting and signaling functions.
- Power supply: The lamp is powered by 12-24V AC/DC or 230V AC (orange), 12-24V AC/DC (white).
- Light source: LED, with a built-in 1 Hz flashing interrupter.
- Operating temperature range: from -20 °C to +60 °C.
- Ingress protection: IP54, providing protection against dust and water splashes.
Installation: Simply drill a small hole in the post and attach the lamp using the adjustment screw – the housing locks inside the post. Thanks to this design, the lamp can function both as a signal indicator and as ambient lighting. When the post is used, e.g., at an automatic gate, the lamp can change its operating mode from lighting to signaling. Ideal for applications in gate automation, vehicle access zones, industrial facilities, warehouses, fence posts, or barriers, where both visibility and status/work signaling are required.
Main advantages:
- LED light source,
- white lamp power supply: 12V AC,
- yellow lamp power supply: 12–24V AC/DC or 230V AC,
- yellow lamp – continuous or flashing operation (1 Hz),
- expandable, discreet mounting on the top of posts 100×100 mm, or 120×120 mm.
Lamp operation
- The lamp is equipped with two independent LED light sources – white and yellow.
- The white lamp is powered by 12 V AC and lights continuously.
- The yellow lamp can be powered by 12–24 V AC/DC or 230 V AC. It operates in continuous or flashing mode (approx. 1 Hz) depending on the connection method.
- Both light sources are galvanically isolated, allowing independent control.
- The lamp is weather-resistant and designed for outdoor use.
Lamp installation:
- The lamp serves as the top of a rectangular post 100×100 mm, 100×100 mm, or 120×120 mm.
- The lower part of the lamp (73×73 mm) must fit inside the post.
- Fully unscrew the conical Allen screws to gently insert the lower part of the lamp into the post.
- On the least visible side of the post, precisely drill a hole (4 mm) aligned with the hexagonal screw socket.
- Using an Allen key inserted through the hole, gently turn left until the lamp housing locks inside the post.
- The product should be used exclusively in accordance with its intended purpose.
- The product should not be subjected to mechanical loads other than those resulting from its normal use.
- The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
- The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
- Do not expose the product to open flames or high temperatures.
- Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
- Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
- Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
- The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
- Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
- If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
- Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
- If there are any doubts about proper use, please consult the manufacturer.
Tulplast Socha sp. k.
62-021 Paczkowo
ul. Wiosenna 27
Monday to Friday 8:00 to 16:00
+48 61 815 70 16 / +48 696 172 856
zamowienia@tulplast.pl
We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl
+48 61 815 70 16
order@tulplast.pl
