Complete sliding gate automation kit for gates up to 600 kg. (Intensive use)
The Beninca KBULL624.TURBO.PM kit includes:
- KBULL624.TURBO.PM actuator 24 Vdc, mechanical limit switches,
- 1 Pupilla photocell line,
- 1 TO.GO2VA two-channel remote control.
Opening time 25m/min
Actuator for intensive use, 24 Vdc. Control panel with built-in encoder and receiver. Unlocking with a personal key.
Built-in power supply (85/265 VAC) - reduced energy consumption.
The receiver memorizes remotes with advanced and secure ARC code, up to 512 codes.
At the first startup, the remotes can be programmed, and an auto-learning procedure can be performed using a remote with the ARC code.
Equipped with a battery charging card.
The integrated STC system, in combination with the virtual encoder, allows for adjusting the actuator's operation to the prevailing conditions, ensuring maximum safety and eliminating accidental amperometric system operation.
Safety is ensured by low voltage and the photocell test function, which checks the operation of safety systems at the beginning of each maneuver.
During unlocking, the safety sensor disconnects the motor power to ensure proper reactivation of the system after maintenance.
Brake control is performed with MOSFET technology (transistor instead of a relay), ensuring smooth operation and preventing brake space increase at higher temperatures.
Option to purchase a version with magnetic limit switches.
Technical specifications:
- Maximum gate weight 600 kg,
- Motor power supply 24 Vdc,
- Speed 12.5-25.5 m/min,
- Duty cycle: intensive use,
- Pulling force 330 N,
- Operating temperature -20°C min, +50°C max.
Note: the kit does not include the rack mounted on the gate.
Note: version with magnetic limit switches available: KBULL624TURBO.S.PM (magnetic limit switches).
- The product should be used exclusively in accordance with its intended purpose.
- The product should not be subjected to mechanical loads other than those resulting from its normal use.
- The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
- The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
- Do not expose the product to open flames or high temperatures.
- Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
- Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
- Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
- The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
- Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
- If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
- Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
- If there are any doubts about proper use, please consult the manufacturer.
Tulplast Socha sp. k.
62-021 Paczkowo
ul. Wiosenna 27
Monday to Friday 8:00 to 16:00
+48 61 815 70 16 / +48 696 172 856
zamowienia@tulplast.pl
We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl
+48 61 815 70 16
order@tulplast.pl
