ATS Standard is a complete set for automating a double-leaf gate with a single wing length of up to 3 meters. The actuators have built-in limit switches for both opening and closing of the gate.
Advantages:
- ATS actuators are highly reliable throughout their operation,
- the bevel gear ensures smooth and quiet operation,
- designed for heavy and wrought iron gates.
The ATS STANDARD set includes:
- 230 V right-side actuator,
- 230 V left-side actuator,
- control board housing,
- ZF1N control board,
- frequency card,
- DIR10 photocells,
- Space 2-channel remote control.
Technical specifications:
- maximum gate weight for a 3 m wing span: 400 kg,
- recommended installation of actuators on posts measuring 120mmx120mm,
- maximum motor power: 250 W,
- opening time to 90°: 15 s.,
- pulling force: 400 N ➗ 300 N,
- operating temperature: -20°C min, +55°C max.
Standard functions:
- possibility of automatic gate closing,
- stop the gate using the remote control,
- security of the stationary gate, open/close commands are ignored if an obstacle is detected in the gate's path.
The telescopic steel arm is protected by an aluminum housing, ensuring resistance to weather conditions.
Instructions in the link.
- The product should be used exclusively in accordance with its intended purpose.
- The product should not be subjected to mechanical loads other than those resulting from its normal use.
- The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
- The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
- Do not expose the product to open flames or high temperatures.
- Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
- Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
- Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
- The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
- Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
- If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
- Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
- If there are any doubts about proper use, please consult the manufacturer.
Tulplast Socha sp. k.
62-021 Paczkowo
ul. Wiosenna 27
Monday to Friday 8:00 to 16:00
+48 61 815 70 16 / +48 696 172 856
zamowienia@tulplast.pl
We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl
+48 61 815 70 16
order@tulplast.pl
