Proxima lighting lamp for post 80/100mm 12V POST LAMP [O] 80/100 12V

Lamp installation:

• The lamp serves as the top of a rectangular post 100×100 mm, 80×100 mm, or 80×80 mm.
• The lower part of the lamp (73×73 mm) must fit inside the post.
• Fully unscrew the conical Allen screws to gently insert the lower part of the lamp into the post.
• On the least visible side of the post, precisely drill a hole (4 mm) aligned with the hexagonal screw socket.
• Using an Allen key inserted through the hole, gently turn left until the lamp housing locks inside the post.

• The product should be used exclusively in accordance with its intended purpose.
• The product should not be subjected to mechanical loads other than those resulting from its normal use.
• The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
• The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
• Do not expose the product to open flames or high temperatures.
• Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
• Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
• Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
• The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
• Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
• If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
• Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
• If there are any doubts about proper use, please consult the manufacturer.
  
  Tulplast Socha sp. k.
  62-021 Paczkowo
  ul. Wiosenna 27
  
  Monday to Friday 8:00 to 16:00
  +48 61 815 70 16 / +48 696 172 856
  zamowienia@tulplast.pl

We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl