Trolley designed for self-supporting sliding gates. Used for various gate profiles and semi-closed channels. Gate trolleys are galvanically zinc-plated and reinforced with yellow CR VI zinc coating, making them more durable and corrosion-resistant. The galvanic layer has a thickness of approximately 8–12 µm.
Advantages of the oscillating trolley:
- Oscillating trolleys are used for standard gates with a proper counterweight ratio.
- The gate does not jam during operation, as the moving elements of the trolley adapt to the gate profile.
- Oscillating trolleys adapt to continuous gate stresses caused by changing weather conditions.
Advantages of the additional adjustment plate
The first lower mounting plate is bolted directly to the foundation base. The second base allows adjustment of the correct height for the closed gate. This solution guarantees stable and solid attachment of the trolley to the foundation base.
Trolley with reinforced construction
Thicker steel sheet has been used. The trolley base has been extended, making installation more convenient.
Sliding trolleys are equipped with polyamide or metal rollers.
Advantages of the polyamide bearing roller:
- Manufactured using injection molding, which guarantees high resistance to abrasion and cracking.
- They reduce noise levels during gate movement.
- Abrasion is lower compared to steel rollers.
- The metal gate profile does not wear out.
- High resistance to changing weather conditions.
Horizontally mounted guide rollers at the front and rear of the trolley allow perfect alignment with the gate guide rail. Additionally, the horizontal rollers protect the vertical rollers from wear. A trolley with six horizontal rollers is recommended for gates with a clear opening length of 4.5–7 m.
Trolley installation
Trolleys are installed at the end of the gate in the so-called counterweight section. It is assumed that the counterweight length is 1/3 of the gate opening width or, for gates longer than 8 m, approximately 1/2 of the gate opening width. The trolley mounting base has four elongated holes (slots), through which it is fixed to the ground using anchors or threaded rods. The maximum rod diameter is M16, with M14 recommended.
Gate load capacity: 400 kg.
Clear gate opening length: 4–6 m.
Mounting plate: TYPE “B” – standard.
- The product should be used exclusively in accordance with its intended purpose.
- The product should not be subjected to mechanical loads other than those resulting from its normal use.
- The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
- The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
- Do not expose the product to open flames or high temperatures.
- Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
- Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
- Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
- The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
- Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
- If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
- Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
- If there are any doubts about proper use, please consult the manufacturer.
Tulplast Socha sp. k.
62-021 Paczkowo
ul. Wiosenna 27
Monday to Friday 8:00 to 16:00
+48 61 815 70 16 / +48 696 172 856
zamowienia@tulplast.pl
We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl
+48 61 815 70 16
order@tulplast.pl
