Proxima Semaphore LED Post Lamp for 80/100 mm Post 12–24V

The SEMAPHORE POST LAMP is an ideal solution wherever information related to traffic safety is required.

Thanks to the use of independent power supplies for the green and red LED diodes, the lamp can perform the function of a semaphore. The lamp forms the end of a rectangular post with dimensions of 80 x 80 mm or 100 x 100 mm. The post opening dimensions must be at least 72 x 72 mm.

The lamp is powered by 12–24V AC/DC (green), 12–24V AC/DC (red). Simultaneous powering of the red and green LEDs will cause the red LEDs to light up. Mounting the lamp requires drilling a small hole in the post to adjust the screw.

The applied mechanism clamps the housing inside the post by turning the screw.

Power supply: 12–24V AC/DC Current consumption at 12V: 12V–200mA

Current consumption at 24V: 24V–130mA Light source: LED

Flasher: No

Operating temperature: from -20° to +60° C

Ingress protection class: IP54

Dimensions: above post; 103 x 103 x 26 mm, inside post 72 x 72 x 20 mm

Weight: 253 g

Lamp installation:

The lamp serves as the top of a rectangular post 100×100 mm, 80×100 mm, or 80×80 mm.
The lower part of the lamp (73×73 mm) must fit inside the post.
Fully unscrew the conical Allen screws to gently insert the lower part of the lamp into the post.
On the least visible side of the post, precisely drill a hole (4 mm) aligned with the hexagonal screw socket.
Using an Allen key inserted through the hole, gently turn left until the lamp housing locks inside the post.

The product should be used exclusively in accordance with its intended purpose.
The product should not be subjected to mechanical loads other than those resulting from its normal use.
The product should not be modified or altered – such actions may lead to loss of protective and safety properties.
The product is not suitable for children. There is a risk of choking on small parts. Keep the product out of the reach of children, especially if it contains small components.
Do not expose the product to open flames or high temperatures.
Do not use the product in chemically aggressive environments (for example, in the presence of solvents, acids, or technical oils), unless specified otherwise by the manufacturer.
Before use, check that the product does not have any cracks, deformations, or other damage. Damaged components must be replaced – products with visible defects must not be used.
Do not modify, cut, or alter the product – this may result in the loss of its properties and increase the risk of accidents due to malfunction.
The product is not intended for contact with food, drinking water, or direct contact with the human body, unless specified otherwise by the manufacturer.
Clean the product with a soft, damp cloth, without aggressive detergents or solvents.
If the product is used in or near electrical installations, ensure that it does not conduct electricity and that its use complies with electrical safety regulations.
Dispose of the product in accordance with local regulations regarding plastic waste. Do not throw it into mixed waste if waste separation is required.
If there are any doubts about proper use, please consult the manufacturer.

Tulplast Socha sp. k.
62-021 Paczkowo
ul. Wiosenna 27

Monday to Friday 8:00 to 16:00
+48 61 815 70 16 / +48 696 172 856
zamowienia@tulplast.pl

We are a manufacturer with over 40 years of experience in the production of plastic and metal products. We have a large warehouse to maintain a deep inventory. Our committed customer service team will quickly handle even the biggest and most demanding orders, including custom-made orders. To ensure top-quality service to our customers, we will gladly examine your requests and prepare an attractive quote. Requests should be sent to: order@tulplast.pl